Im really curious HOW THE HELL will you run multihomming without your own
AS?
and as far as I know you need a block of IP to qualify for a AS (
www.arin.net )
and yes a 2500 router can support it with enought flash if you know how to
build your bgp table.

Marc Giroux
Product Manager DWDM & Cable Solutions
Ericsson Canada
905-206-7441
416-817-0268 cell



> -----Original Message-----
> From: Daniel Ji [SMTP:[EMAIL PROTECTED]]
> Sent: Monday, July 17, 2000 12:56 PM
> To:   [EMAIL PROTECTED]
> Subject:      Re: BGP multihoming question
> 
> You don't have to have an AS number and your own IP block but it is
> strongly
> recommended if you are SERIOUS about multihoming. router configuration
> really depends on your specific needs, but I probably will never run BGP
> with a 2500 even for a small company use. A 3600 with 64 DRAM and 16 Flash
> will do it pretty good if your AS is not a transit AS.
> 
> Daniel
> 
> ""Mehmet Ilgaz"" <[EMAIL PROTECTED]> wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > As a costumer, I want to have two internet connection to 2 different
> ISP.
> > I must have an AS number and  a registered IP block . Is it true?
> > What is the minimum router konfiguration for this situation?Can Cisco
> 2500
> > support this?
> >
> >
> > ___________________________________
> > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > ---
> 
> 
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to