At 11:52 AM 7/20/00, Wolfgang Lochbihler wrote:
>Hello
>
>How would you configure a Cisco router with two serial
>interfaces to be used as a modem eliminator?
>I have have already done some tests using the router as
>frame-relay switch.
Why would you want to do such a thing??
I have my back-to-back routers in my lab connected via modem eliminators,
but that is simply because I had the modem eliminator boxes (from Black
Box) and I did not have any cross-over serial cables. It's a Rube Goldberg
solution! ;-)
So I have something like this
RouterA ----ME----RouterB -----ME-----RouterC
With the right cables, you can simply do
RouterA ----RouterB---- RouterC
Priscilla
>But maybe one of you has some additional ideas?
>
>Regards
>Wolfgang
>
>
>___________________________________
>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>FAQ, list archives, and subscription info: http://www.groupstudy.com
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
________________________
Priscilla Oppenheimer
http://www.priscilla.com
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
