Howard i followed yor directions and it worked perfectly--Good ONe !
>From: "Howard C. Berkowitz" <[EMAIL PROTECTED]>
>Reply-To: "Howard C. Berkowitz" <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: Re: Modem eliminator
>Date: Thu, 20 Jul 2000 15:08:03 -0400
>
>>At 11:52 AM 7/20/00, Wolfgang Lochbihler wrote:
>>>Hello
>>>
>>>How would you configure a Cisco router with two serial
>>>interfaces to be used as a modem eliminator?
>>>I have have already done some tests using the router as
>>>frame-relay switch.
>
>
>Approach #1 to modem elimination with Cisco routers:
>
>1. Place the modem on a hard surface.
>2. Collect 2-3 strong women or men.
>3. Lift a fully loaded AGS, 7000, or higher router to a height of
> at least 3 feet.
>4. Release the router such that it falls onto the modem.
>5. If the modem is not eliminated, return to step 3. In extreme cases,
> use a 12000 series router.
>
>Approach #2
>
>Virtual multipoint with STUN?
>
>>
>>
>>Why would you want to do such a thing??
>>
>>I have my back-to-back routers in my lab connected via modem
>>eliminators, but that is simply because I had the modem eliminator
>>boxes (from Black Box) and I did not have any cross-over serial
>>cables. It's a Rube Goldberg solution! ;-)
>>
>>So I have something like this
>>
>>RouterA ----ME----RouterB -----ME-----RouterC
>>
>>With the right cables, you can simply do
>>
>>RouterA ----RouterB---- RouterC
>>
>>Priscilla
>>
>>
>>>But maybe one of you has some additional ideas?
>>>
>>>Regards
>>>Wolfgang
>>>
>>>
>>>___________________________________
>>>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>>>FAQ, list archives, and subscription info: http://www.groupstudy.com
>>>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>>
>>
>>________________________
>>
>>Priscilla Oppenheimer
>>http://www.priscilla.com
>>
>>___________________________________
>>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>>FAQ, list archives, and subscription info: http://www.groupstudy.com
>>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>"What Problem are you trying to solve?"
>***send Cisco questions to the list, so all can benefit -- not
>directly to me***
>
>Howard C. Berkowitz [EMAIL PROTECTED]
>Technical Director, CertificationZone.com
>Senior Product Manager, Carrier Packet Solutions, NortelNetworks (for ID
>only)
> but Cisco stockholder!
>"retired" Certified Cisco Systems Instructor (CID) #93005
>
>___________________________________
>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>FAQ, list archives, and subscription info: http://www.groupstudy.com
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
