What type of routes do you have on each router? Only connected and
static? Are you using "redistribute static connected" in your eigrp
config?
Brian
On Mon, 24 Jul 2000, alex campbell wrote:
>
> Hello ppl
>
> I have two routers, both connected to a standard 10mb hub. Both can ping
> each other as can a PC which is also on this mini network.
>
> 1 is a 2501 with IOS 11.3 connected via ethernet
> 1 is a 2620 with IOS 12.0 connected via fast ethernet
>
> I am trying to get these two to share routes via EIGRP but to no avail. Both
> are set to routing process 1, both have routes..and (odd bit here) a network
> monitor on the PC says that they are advertising routes!
> but they do not seem to share routes
> when i do show ip eigrp interface on the 2620 it does NOT list any info!
> but when i do it on the 2501 it lists ethernet 0.
> But I am doing the same thing for each router !
>
> Is it incompatibility between 12.0 and 11.3, I find it difficult to believe
> but someone has suggested it ?
> Or am I missing something obvious ?
>
> Any help appreciated
> Mark,
>
> ________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
--
-----------------------------------------------------
Brian Feeny, CCNA [EMAIL PROTECTED]
318-222-2638 x 109 http://www.shreve.net/~signal
Network Administrator ShreveNet Inc. (ASN 11881)
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
