This command let you split the 16 meg flash into two, this can be used for
dual images or
applications where you need a separate image i.e mica modem software
Ged Bowey
""Swart, Douwe"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
>
> Just taking a look at a few router configs, and came across the
following -
> from show run.
>
> boot system flash 2:c2500-g-l.112-15a
> boot system flash
> boot system flash bootflash:
> .
> .
> .
> partition flash 2 8 8
>
> Does anyone have any idea what this is about. Im searching through the
> cisco site....but until my CCO/TAC login arrives, the info I have access
to
> is fairly limited. I know the c2500-g-1.112-15a is the image file that it
> is booting off, Im just not sure why there are numerous boots in the same
> config file.
>
> I would appreciate any knowledge that you would like to share
>
> Thanks guys and gals
>
>
> Douwe
>
> Visit our Website : http://www.traveland.com.au
>
> Disclaimer - This message and any attachments are confidential and may
contain privileged information intended only for the use of the addressee
named above. If you are not the intended recipient of this message you are
hereby notified that any use, dissemination, distribution or reproduction of
this message is prohibited. If you have received this message in error
please notify Traveland Pty Ltd immediately by return email. Any views
expressed in this message are those of the individual sender and may not
necessarily reflect the views of Traveland Pty Ltd.
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
