<< partition
flash 2 8 8 >>
Don't ask me why, but
this is what a 16 Meg (2X 8 Meg sticks) router defaults to. I noticed this
very thing with my 2512, when I added a second stick of FLASH. You
can erase it & change the parameters as you choose. Evidently (in your
case), if you run Mega Show FLASH- you image is smaller than 8 Megs.
You cannot cross those 2 8 Meg 8Megs settings, with this command in NVRAM.
You will need use both stick collectively, if you should decide to run a 12
Enterprise...
Good Luck
!!!
Phil
----- Original Message -----
From: "Swart, Douwe" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, July 25, 2000 3:41 AM
Subject: Flash Partition
> Just taking a look at a few router configs, and came across the following -
> from show run.
>
> boot system flash 2:c2500-g-l.112-15a
> boot system flash
> boot system flash bootflash:
> .
> .
> .
> partition flash 2 8 8
>
> Does anyone have any idea what this is about. Im searching through the
> cisco site....but until my CCO/TAC login arrives, the info I have access to
> is fairly limited. I know the c2500-g-1.112-15a is the image file that it
> is booting off, Im just not sure why there are numerous boots in the same
> config file.
>
> I would appreciate any knowledge that you would like to share
>
> Thanks guys and gals
>
>
> Douwe
>
> Visit our Website : http://www.traveland.com.au
>
> Disclaimer - This message and any attachments are confidential and may contain privileged information intended only for the use of the addressee named above. If you are not the intended recipient of this message you are hereby notified that any use, dissemination, distribution or reproduction of this message is prohibited. If you have received this message in error please notify Traveland Pty Ltd immediately by return email. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of Traveland Pty Ltd.
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
