Try disabling the interface, then remove it.
At 04:44 PM 7/31/00 -0400, you wrote:
>Hi,
>I have enable dynamic nat on a 2501 and cannot take it out. It gives me an
>error msg. "Pool Internet in use;Cannot redefine". "Dynamic mapping in
>use. Cannot remove"
>
>Basically, instead of specifying a legal range of addresses for the pool,
>I specified the internet addresses 10.11.10.2 through 10.11.10.20.
>
>I also have access list 1 specified for 10.11.10.0 0.0.0.255.
>I have for E0 - ip nat inside and for S0 - ip nat outside
>
>What do I do first to modify the ip nat pool Internet line to include the
>legal range?
>
>I first removed the access-list and then the nat for both s0 and e0? I
>still get the error msg. I did a no ip nat .... and still get the error msg.?
>
>Please advise
>Thank you.
>Kind regards,
>[EMAIL PROTECTED]
>________________________________________________________________________
>Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
>
>___________________________________
>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>FAQ, list archives, and subscription info: http://www.groupstudy.com
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
