ip local pool fortelnet 172.16.1.21 vpngroup telnetaccess address-pool fortelnet vpngroup telnetaccess idle-time 1800 vpngroup telnetaccess password whatever telnet 172.16.1.21 255.255.255.255 outside
The lines above will give you a start. You will also require a Cisco VPN Client loaded onto your PC and direct internet access. If we told you everything there would be no challenge. Good luck Cheers, Steve Wilson Network Engineer -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: 04 April 2003 14:23 To: [EMAIL PROTECTED] Subject: RE: allowing telnet to the outside pix interface [7:66433] You cannot telnet to the PIX's outside interface normally....But the only way you can telnet to the outside interface is if you have a IPSec tunnel that terminates onto the PIX. Then telnet is allowed. see link http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_62/cmdref/tz.h tm#1025921 Cheers Simon -----Original Message----- From: Ismail Al-Shelh [mailto:[EMAIL PROTECTED] Sent: Saturday, March 29, 2003 7:32 PM To: [EMAIL PROTECTED] Subject: allowing telnet to the outside pix interface [7:66433] Hi all How can I let peoples outside the pix firewall to telnet my outside Pix firewall IP address which is 212.121.211.123 ? -------212.121.211.123--------(515E-PIX)---------10.1.1.1-------------- I have PIX Firewall Version 6.1(4). Regards, Ismail Al-Shelh Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=66847&t=66433 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
