Looks like your flash may be empty. There are a couple of ways of loading a new image to flash from boot image. Normal TFTP is the easiest. Looks like it may not recognise your WAN interface with the boot image, but your ethernet should be there and usable for TFTP. Have a search on CCO. If you search for '1600 boot image' you should find something.
Gaz ""CiscoNewbie"" wrote in message news:[EMAIL PROTECTED] > I have a 1600 series router that is not booting. I gives me the > Router(boot)> prompt when it boots. Can someone tell me how to get it to > boot properly. Here is the output: snip Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=66878&t=66850 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
