configure one router smilating the ISDN switch one router for the client with "pri-group timeslots 1-31" under the D channel and to kick in all B channels with ppp multilink and dialer-load thershold 1 it should work
regards devrim ----- Original Message ----- From: "Valeri Marinski" To: Sent: Wednesday, June 04, 2003 4:43 PM Subject: E1 PRI to E1 PRI via Dialup&All channels [7:70134] > Hi, > > i'd like to configure a PRI to PRI DIALUP connection between two routers > using all the available channels but i get only 1 or 2 channels up what is > the problem?!? > > Is it the right way to configure: > > pri-group timeslots 1-31 > > and than to use a "Dialer" interface to "dialer map ip .... " > > or should i for a channel group with: > > channel-group 0 timeslots 1-31 > > i tried but i couldn't bind the Serial1/0:0 interface that was created by > this configuration to any dialer > --- is it only for cable-to-cable connection ?? > > because i have to dial a number for this approach. > > > thanks in advance for any comments or recommendations Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70149&t=70134 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
