CottePo,
CCO lesen. Es gibt mehr als genug beispiele. ISDN Configuration Examples http://www.cisco.com/en/US/partner/tech/tk801/tk379/tech_configuration_examples_list.html Configuring ISDN PRI and Other Signalling on E1 and T1 http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1831/products_configuration_guide_chapter0 9186a00800d9842.html ""Valeri Marinski"" wrote in message news:[EMAIL PROTECTED] Hi, i'd like to configure a PRI to PRI DIALUP connection between two routers using all the available channels but i get only 1 or 2 channels up what is the problem?!? Is it the right way to configure: pri-group timeslots 1-31 and than to use a "Dialer" interface to "dialer map ip .... " or should i for a channel group with: channel-group 0 timeslots 1-31 i tried but i couldn't bind the Serial1/0:0 interface that was created by this configuration to any dialer --- is it only for cable-to-cable connection ?? because i have to dial a number for this approach. thanks in advance for any comments or recommendations [demime removed a uuencoded section named s.gif which was 3 lines] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70156&t=70134 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
