Hi, I've set up a Cisco 801 to dial into a Cisco 2600 with a E1/PRI card installed, with 8 channels of ISDN available.
The idea being that the Cisco 801 (192.168.13.0/24) will dial into and route traffic to the 2600 (public range). I have successfully got the routers to talk and accepts username/passwords, and the 801 will bring up both channels if needed. What I can't do is get the traffic to come back across the 2600. All pings (from either side) fail, both routers show the ISDN call in progress and using 'sh ISDN status' I get the number of channels and time of each call info. The 801 is setup to route all data to 'Dialer1', so I don't believe the problem to be there. The 2600, I thought, would establish a route when the 801 calls in, but this doesn't appear to be the case (I've obviously missed something). Further down the line more 801's are planned for deployment, so I can't create static routes etc...... Can anyone help? Config of 2600: SHIUK-RTR01# sh run Building configuration... Current configuration: ! version 12.0 service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname SHIUK-RTR01 ! enable secret xxxxxxx enable password xxxxxxx ! username LUXLU-RTR01 password 0 luxlu-rtr01 ip subnet-zero isdn switch-type primary-net5 ! ! ! controller E1 1/0 pri-group timeslots 1-8,16 ! ! ! interface Ethernet0/0 ip address w.x.y.z 255.255.255.0 no ip directed-broadcast no mop enabled ! interface Serial0/0 no ip address no ip directed-broadcast shutdown ! interface Serial0/1 no ip address no ip directed-broadcast shutdown ! interface Serial1/0:15 description incomming ISDN no ip address no ip directed-broadcast encapsulation ppp dialer pool-member 1 isdn switch-type primary-net5 ppp authentication chap ppp multilink ! interface Dialer1 description conencted to LUXLU-RTR01 no ip address no ip directed-broadcast encapsulation ppp no ip split-horizon dialer remote-name LUXLU-RTR01 dialer pool 1 dialer-group 1 no peer default ip address no cdp enable ppp authentication chap ppp multilink ! ip classless ! dialer-list 1 protocol ip permit ! ! line con 0 transport input none line aux 0 line vty 0 4 password telnet login ! end Keith Hanna IT Controller Northrop Grumman Mission Systems Europe Mobile : +44 (0) 776 9933 049 Office : +44 (0) 121 506 8365 Fax : +44 (0) 121 506 8477 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70721&t=70721 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
