[EMAIL PROTECTED] wrote: > Hi, > > I've set up a Cisco 801 to dial into a Cisco 2600 with a E1/PRI card > installed, with 8 channels of ISDN available. > > The idea being that the Cisco 801 (192.168.13.0/24) will dial into and route > traffic to the 2600 (public range). I have successfully got the routers to > talk and accepts username/passwords, and the 801 will bring up both channels > if needed. > > What I can't do is get the traffic to come back across the 2600. All pings > (from either side) fail, both routers show the ISDN call in progress and > using > 'sh ISDN status' I get the number of channels and time of each call info. > > The 801 is setup to route all data to 'Dialer1', so I don't believe the > problem to be there. The 2600, I thought, would establish a route when the > 801 > calls in, but this doesn't appear to be the case (I've obviously missed > something). > Further down the line more 801's are planned for deployment, so I can't > create > static routes etc......
Then you better "create" dynamic routes!!! Dave > > Can anyone help? > > Config of 2600: > > SHIUK-RTR01# sh run > Building configuration... > > Current configuration: > ! > version 12.0 > service timestamps debug uptime > service timestamps log uptime > no service password-encryption > ! > hostname SHIUK-RTR01 > ! > enable secret xxxxxxx > enable password xxxxxxx > ! > username LUXLU-RTR01 password 0 luxlu-rtr01 > ip subnet-zero > isdn switch-type primary-net5 > ! > ! > ! > controller E1 1/0 > pri-group timeslots 1-8,16 > ! > ! > ! > interface Ethernet0/0 > ip address w.x.y.z 255.255.255.0 > no ip directed-broadcast > no mop enabled > ! > interface Serial0/0 > no ip address > no ip directed-broadcast > shutdown > ! > interface Serial0/1 > no ip address > no ip directed-broadcast > shutdown > ! > interface Serial1/0:15 > description incomming ISDN > no ip address > no ip directed-broadcast > encapsulation ppp > dialer pool-member 1 > isdn switch-type primary-net5 > ppp authentication chap > ppp multilink > ! > interface Dialer1 > description conencted to LUXLU-RTR01 > no ip address > no ip directed-broadcast > encapsulation ppp > no ip split-horizon > dialer remote-name LUXLU-RTR01 > dialer pool 1 > dialer-group 1 > no peer default ip address > no cdp enable > ppp authentication chap > ppp multilink > ! > ip classless > ! > dialer-list 1 protocol ip permit > ! > ! > line con 0 > transport input none > line aux 0 > line vty 0 4 > password telnet > login > ! > end > > > > > > Keith Hanna > IT Controller > Northrop Grumman Mission Systems Europe > Mobile : +44 (0) 776 9933 049 > Office : +44 (0) 121 506 8365 > Fax : +44 (0) 121 506 8477 -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 "Government can do something for the people only in proportion as it can do something to the people." -- Thomas Jefferson Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70736&t=70721 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
