Looks like it could be a duplexing issue , check your duplex settings on each side and make sure they are the same.
-----Original Message----- From: Poulin, Darnell [mailto:[EMAIL PROTECTED] Sent: 16 June 2003 05:49 PM To: [EMAIL PROTECTED] Subject: Errors on Ethernet Interfaces [7:70733] Hey folks. What do you people think about all of the Interface Resets, and Output Errors on this interface, could it be a physical problem? 5 minute output rate 6000 bits/sec, 5 packets/sec 147723073 packets input, 527428115 bytes, 0 no buffer Received 8574309 broadcasts, 0 runts, 0 giants, 0 throttles 89 input errors, 89 CRC, 72 frame, 0 overrun, 0 ignored, 0 abort 0 input packets with dribble condition detected 180465700 packets output, 4160119128 bytes, 0 underruns 3266629 output errors, 1060615 collisions, 3168706 interface resets 0 babbles, 3266619 late collision, 442865 deferred 10 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out Thanks in advance. NOTICE - This message contains privileged and confidential information intended only for the use of the addressee named above. Any review, retransmission, dissemination, copying, disclosure or other use of, or taking of any action in reliance upon, this information by person or entities other than the intended recipient is prohibited. If you have received this message in error, please notify the sender by return email and delete this message. This message should not be copied or used for any purpose other than intended, nor should it be disclosed to any other person. Any views expressed in this message are those of the individual sender, except where the sender specifically states them to be the view of Investec Group, its subsidiaries or associates. The Investec Group is not liable for the security of information sent by e-mail at your request, nor for the proper and complete transmission of the information contained in the communication nor for any delay in its receipt. Please note that the recipient must scan this e-mail and any attached files for viruses and the like. The Investec Group accepts no liability of whatever nature for any loss, liability, damage or expense resulting directly or indirectly from the access of any files which are attached to this message. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70848&t=70733 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
