Hi,
I've got a prob with ntp. The ntp is configured but the command "ntp
clock-period ........." didn't appear when doing "show running" command.
I've tried reload, disable/enable the ntp but never work. I saw the offset
value is very high compare with the normal one. What is the cause to make it
high like this? Please help.
pbi_vgw_003#sh run | be ntp
ntp update-calendar
ntp server 203.113.94.20
ntp server 203.113.94.19
pbi_vgw_003#sh ntp as
address ref clock st when poll reach delay
offset disp
~203.113.94.20 203.113.94.1 2 57 64 0 1.1 2699.9
16000.
~203.113.94.19 203.113.94.1 2 42 64 0 1.0 833.67
16000.
* master (synced), # master (unsynced), + selected, - candidate,
~configured
The another device is on the same subnet & never get a problem
pbi_vgw_001#sh run | be ntp
ntp clock-period 17179504
ntp update-calendar
ntp server 203.113.94.20
ntp server 203.113.94.19
pbi_vgw_001#sh ntp as
address ref clock st when poll reach delay
offset disp
*~203.113.94.20 203.113.94.1 2 281 1024 377 1.1 1.28
0.3
+~203.113.94.19 203.113.94.1 2 259 1024 377 1.1 6.81
0.4
* master (synced), # master (unsynced), + selected, - candidate,
~configured
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=71887&t=71887
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
