I have a failry generic three-router ospf set that I am trying to cross with
a virtual link:
R1 (area0, area 3) R2 (area 3) R4 (area 3, 23)
(192.168.255.245/30) (192.168.255.254/30)
[area 3 virt 192.168.255.254] [area 3 virt 192.168.255.245]
Traffic routes properly except the area 23 stuff because there is no
connection oto area 0. When I try to install the "area 3 virtual-link
192.168.255.254 area 3 virtual-link 192.168.255.245" statement pair to link
area 23 across area 3 I get lots of these:
%OSPF-4-ERRRCV: Received invalid packet: mismatch area ID, from backbone
area must be virtual-link but not found from 192.168.11.9, Serial1/1
The address 192.168.11.9 is on the intervening router. The link from R1 to
R2 is a F.R. link set to point-to-multipoint on each end.
Any ideas?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=71926&t=71926
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
