Thanks for your config. But would be ideal if you can send me a config when there is no pt-2-pt link.
Rgds ----- Original Message ----- From: alaerte Vidali To: [EMAIL PROTECTED] Sent: Thursday, July 17, 2003 1:25 AM Subject: RE: Multicasting [7:72403] I have configured it same time ago; the serial link was frame relay. But I used point-to-point subinterface Something like that: R1 interface tunnel 0 ip address 172.16.1.1 255.255.255.252 ip pim sparse-dense-mode tunnel source 192.168.1.1 tunnel destination 192.168.1.2 ! inter ser 0 encap frame-relay ! inter ser 0.1 point ip ad 192.168.1.1 255.255.255.252 frame-relay map interface-dlci 100 Same for R2. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=72458&t=72403 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
