even though it was throwing the error it seemed to function normally and recognized the nm-1fe (hence the need for the upgrade). I put it on the network and started a tftp upgrade (as later suggested by Ganesh) and went home and slept. It finished okay but this morning is still throwing the same error. :(
I doubt it's hardware because it wasnt throwing the error on 11.whateveritwas and it does it whether the nm-2fe is in there or not. It seems to work fine but i HATE having machines with those errors that you always have to tell people "dont worry about that..." -----Original Message----- From: Raj Singh [mailto:[EMAIL PROTECTED] Sent: Wednesday, July 23, 2003 6:35 AM To: [EMAIL PROTECTED] Subject: RE: ios upgrade... [7:72779] Here u go! Bus Error Crashes The system encounters a bus error when the processor tries to access a memory location that either does not exist (a software error) or does not respond properly (a hardware problem). A bus error can be identified by looking at the output of the show version command provided by the router (if not power-cycled or manually reloaded). Raj Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=72813&t=72779 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
