Has anyone had any experience w/the following combination?
3640 & NM-1HSSI & Kentrox DataSMART T3/E3 IDSU
I've been trying, to no avail, to bring the HSSI up for a 12M DS3.... The
CSU/DSU, according to the lights, is ready to send and receive data; but
when I bring up the int on the router, it shows down down. Here's the
router info:
~~~~~~~~~~~~~~~~~~~~~~~~~~~
interface Hssi1/0
bandwidth 12000
ip address x.x.x.x 255.255.255.252
serial restart_delay 0
no cdp enable
Hssi1/0 is down, line protocol is down
Hardware is M1T-HSSI-B
Internet address is x.x.x.x/30
MTU 4470 bytes, BW 12000 Kbit, DLY 200 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation HDLC, crc 16, loopback not set
Keepalive set (10 sec)
Restart-Delay is 0 secs
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue :0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 parity
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 applique, 8 interface resets
0 output buffer failures, 0 output buffers swapped out
13 carrier transitions LC=down CA=down TM=down LB=down TA=up
LA=down
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=73129&t=73129
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
