>Hey group,
>
>A company HQ has two 3620s each with one T1 into the same frame
>relay cloud. There are 20 branch offices with non-Cisco routers
>pointing into the same FR cloud. Is there anyway to provide load
>balancing on the WAN side in this situation?
What problem are you trying to solve by load balancing? Equalizing
load on the HQ routers? Reconvergence after failures? Equalization
of the load on the T1s?
Is bandwidth optimization more important than increases in
out-of-sequence packets? Is traffic equal among the sites?
> I believe that I can use HSRP on the LAN side of HQ, but that is
>not possible on the WAN. I cannot use EIGRP because it is Cisco
>proprietary.
>
>The only solution I see is to build two PVCs at each branch office.
>One pointing to router 1 at HQ and one pointing to router 2 at HQ.
>Run OSPF and have half of the branches point to each router.
>
>Does anyone have a solution/advice for this design?
>
>Thanks for your help,
>Rob
>
> |-----------routerA==========~~~~~~~~~~~~~===========branch1
> Internal | ~ Frame
>Relay ~===========branch2
> LAN | ~
>Cloud ~===========branch3
>
>|-----------routerB==========~~~~~~~~~~~~~=========== etc, etc,
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
