Hi Wallis. You have to use a crossover cable, not the normal straight through. If you have the one with octal cables, you can use a RJ45-RJ45 connector and then another crossover cable.
Best regards, Oliver Wallis Short sagte: > HI All > > I was wondering if any of you guys have come across reverse telnet > problems > with the 2511 access server? > Basically I have 8 devices connected and when I reverse telnet to them all > is OK, but on when I try and connect to a 2900 XL switch I get this : > Termserver#telnet 192.168.1.1 2006 > Trying 192.168.1.1, 2006 ......Open > > And thats it, nothing else. No command prompt or anything comes up on the > screen > > I have configured telnet connections as exactly the same as all my other > devices, I have IOS 12.0(5.2). > > Any ideas ?? > Cheers > Wallis > **Please support GroupStudy by purchasing from the GroupStudy Store: > http://shop.groupstudy.com > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > -- Oliver Hensel telematis Netzwerke GmbH mailto: [EMAIL PROTECTED] Siemensstrasse 23, D-76275 Ettlingen Tel: +49 (0) 7243-3448-0, Fax: -498 visit us: http://telematis.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=73660&t=73656 -------------------------------------------------- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
