I had a similar problem with a PIX-501. My solution was to add 'modem cts-required' under the line configuration of the termainl server connected to the PIX.
I dont think it is a cable issue... troubleshoot physical layer up. If you can use a computer with a rollover cable and it works, you should be able to use an octal cable with no problems. If you dont get a response, try the same line of the octal cable on anohter device. Now we know it's not the device we are connecting to, and it's not the octal cable... Boils down to protocol or handshaking on the line. Ed Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=73724&t=73656 -------------------------------------------------- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
