Kaiser,
Your primary interface is up, so your backup interface is in
standby mode. This is normal behavior. What are you trying to
accomplish?
HTH,
Brian McGahan, CCIE #8593
[EMAIL PROTECTED]
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-334-8987
Direct: 708-362-1418 (Outside the US and Canada)
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Thursday, September 04, 2003 4:20 PM
To: [EMAIL PROTECTED]
Subject: backup interface [7:74836]
Hi,
I am having issue with backup interface with isdn. I can ping
my directly connected bri interface. but as soos as I hit my
serial backup interface bri 0/0. Bri goes down. i do show isdn
staus it says layer one deactived. this what it shows for sh ip int
Interface IP-Address OK? Method Status
Protocol
Ethernet0/0 unassigned YES NVRAM up
up
Ethernet0/0.4 130.4.34.3 YES NVRAM up
up
Ethernet0/0.6 130.4.36.3 YES NVRAM up
up
BRI0/0 130.4.113.3 YES NVRAM standby mode
down
Serial0/0 130.4.100.3 YES NVRAM up
up
BRI0/0:1 unassigned YES unset administratively
down
down
BRI0/0:2 unassigned YES unset administratively
down
down
Virtual-Access1 unassigned YES TFTP down
down
Loopback0 130.4.3.3 YES manual up
up
Thanks in advance for eveyone's help.
Sincerely,
Kaiser A
**Please support GroupStudy by purchasing from the GroupStudy Store:
http://shop.groupstudy.com
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=74845&t=74836
--------------------------------------------------
**Please support GroupStudy by purchasing from the GroupStudy Store:
http://shop.groupstudy.com
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
