Kaiser,
Shutting the local primary interface down will not trigger the
backup interface. The line protocol of the primary interface must go
down in order to bring the backup interface out of standby. Try
shutting down the link from the other side, or just unplug the serial
interface.
HTH,
Brian McGahan, CCIE #8593
[EMAIL PROTECTED]
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-334-8987
Direct: 708-362-1418 (Outside the US and Canada)
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Friday, September 05, 2003 1:01 AM
To: [EMAIL PROTECTED]
Subject: RE: backup interface [7:74836]
Hi,
even when i shut down my serial interface nothing happens. Bri 0/0
stays in standby mode. and sub interfaces in administratively down.
one thing to keep in minds that i am using a simmultor. it is not
real isdn. show isdn status shows layer 1 deactivated.
Thanks
kaiser A
**Please support GroupStudy by purchasing from the GroupStudy Store:
http://shop.groupstudy.com
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=74872&t=74836
--------------------------------------------------
**Please support GroupStudy by purchasing from the GroupStudy Store:
http://shop.groupstudy.com
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
