Copy the IOS image onto a PCMCIA flash card on the Sup and boot from that or
copy that over to the MSFC bootflash...
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_5_4/msfc/star
tup.htm
""Amit Lilani"" <[EMAIL PROTECTED]> wrote in message
8njsca$c8q$[EMAIL PROTECTED]">news:8njsca$c8q$[EMAIL PROTECTED]...
> hi guys,
>
> i have a 6509 switch with 2 sup 1's and 2 msfc's ( modules 15 and 16)
> what went wrong was we upgraded the msfc module with the wrong ios code
> (12.07.XE1). no it does not seem to come up and goes into a loop. still i
> can go into RMON using the switch console command. put whenever i use
xmodem
> to upgrade the ios it FAILS... its gives the message timeout.... and say
> automatic logout... i spoke to cisco tac... (very slow in responding back)
> they mailed me back saying the baud rate can not go more that 9600 on a
> console which is true......I DONT know how to proceeds ...any
> clues...suggestions are most welcome....
>
> thanks a lot for all your help
>
> amit.
>
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
