Do a show ver make sure the config register is 0x2102. If it is not go into
config mode and change it with the config-register command.
-- Kevin
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> [EMAIL PROTECTED]
> Sent: Sunday, August 20, 2000 5:59 PM
> To: [EMAIL PROTECTED]
> Subject: cisco 2504 problem
>
>
> ok techies...
> here is a problem i been trying to sort out for a quite a little time now
> this router I purchased recently seems ok nothing is broken boots ok now
> the problem is everytime it boots up it has forgotten what the last
> configuration was I mean I always make config changes and give the comman
> "copy run star" and no error pops up but when I turn it off and back on
> again and there is stupid message asking me to redo the whole damn config
> file could someone tell me if it is the Flash or the IOS itself or
> something else that could be wrong with the router.
>
> Regards,
> Amir
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
