Trace back to when this
started... The freakiest things I have seen in this area, are caused by
incompatible boot ROM's. If you have a 2500, you need install the 11.0
(10c) model (they are free from Cisco). The part # is BOOT-2500=. I have also seen this issue when the
IOS image is small enough to fit in FLASH, but when decompressing it did
not leave enough room for the router to perform all it's other boot tasks in
RAM. Boot ROM's & Config-register (needs to be Config-register 0x2102) are my first guesses
though....
Good Luck
!!!
Phil
----- Original Message -----
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, August 20, 2000 11:59 PM
Subject: cisco 2504 problem
> here is a problem i been trying to sort out for a quite a little time now
> this router I purchased recently seems ok nothing is broken boots ok now
> the problem is everytime it boots up it has forgotten what the last
> configuration was I mean I always make config changes and give the comman
> "copy run star" and no error pops up but when I turn it off and back on
> again and there is stupid message asking me to redo the whole damn config
> file could someone tell me if it is the Flash or the IOS itself or
> something else that could be wrong with the router.
>
> Regards,
> Amir
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
