change the config register calue back to 0x2102 in the global configuration
mode using the command :
Router(config)# config-register 0x2102
Regards
Atif
-----Original Message-----
From: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>;
[EMAIL PROTECTED]@groupstudy.com
<[EMAIL PROTECTED]@groupstudy.com>; [EMAIL PROTECTED]
<[EMAIL PROTECTED]>
Date: Sunday, August 27, 2000 10:11 PM
Subject: Router will not save config
>Ok, I have ran the Cisco password recovery procedures and now the router
>keeps coming up in the initial configuration dialog. The routers will not
>save the config. Any help would be greatly appreciated. They are IGS
>Systems with Bootstrap, Version 4.6(6), SOFTWARE Copyright (c) 1986-1993
by
>Cisco Systems
>IGS processor with 4096 Kbytes of memory. Yes they are old but it is all I
>have right now. Thanks in advance.
>
>Ken <A HREF="http://www.geocities.com/trexken_2000">Ken's Page</A>
>
>___________________________________
>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>FAQ, list archives, and subscription info: http://www.groupstudy.com
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
