Ken,
When you type 'show startup-config' or 'show config' what is shown? Is
your saved configuration there?
How did you initially set up the config-register? I think the IGS has a
hardware configuration register IIRC used for IOS releases prior to 9.1.
It's on the back of the router. It's a set of dip switches correspond to
the newer software config-register. Typically I've seen 0x0102 or 0x2102
used for normal startup. If counting from the right, starting at zero, bit
6 set (0x0142) ignores the configuration. On the dip switches, that's
number seven, as shown below:
0x0102 = 0000 0001 0000 0010 1's = 'on', 0's = 'off'
0x0142 = 0000 0001 0100 0010
If it's in software (IOS Release 9.1 or later), just go into Router(config)#
and type 'config-register 0x0102' It should read the configuration upon
startup.
Take a gander at:
http://www.ieng.com/univercd/cc/td/doc/cisintwk/itg_v1/tr1924.htm#xtocid2824
312
Hope this helps,
Chris M.
----- Original Message -----
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>;
<[EMAIL PROTECTED]>
Sent: Sunday, August 27, 2000 9:59 AM
Subject: Router will not save config
> Ok, I have ran the Cisco password recovery procedures and now the router
> keeps coming up in the initial configuration dialog. The routers will not
> save the config. Any help would be greatly appreciated. They are IGS
> Systems with Bootstrap, Version 4.6(6), SOFTWARE Copyright (c) 1986-1993
by
> Cisco Systems
> IGS processor with 4096 Kbytes of memory. Yes they are old but it is all
I
> have right now. Thanks in advance.
>
> Ken <A HREF="http://www.geocities.com/trexken_2000">Ken's Page</A>
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
