Not a problem, since I have the OS diskette. I
didn't need to do the recovery, I was seeking the general knowledge around it.
Here is another question though.
When
you have 2 firewalls and they are setup for redundancy, ( forgive my ignorance
if I'm using the incorrect terms and feel free to correct me. ) and one fails,
does the other automatically step in, or how does that work?
Joey
[Fowler, Robert] ) -----Original Message-----
From: Guyler, Rik [EESUS] [mailto:[EMAIL PROTECTED]]
Sent: Monday, August 28, 2000 12:40 PM
To: Fowler, Joey; Cisco Groupstudy (E-mail)
Subject: RE: Pix Firewall Password RecoveryI have done the PIX password recovery per CCO and can confirm that it does indeed work as stated. The only "gotcha" I can think would be a problem is knowing the correct PIX OS version running on the box.Rik Guyler-----Original Message-----
From: Fowler, Joey [mailto:[EMAIL PROTECTED]]
Sent: Monday, August 28, 2000 10:31 AM
To: [EMAIL PROTECTED]
Subject: Pix Firewall Password Recovery
I've been told be someone who attended the Cisco training course on PIX that to do a password recovery on one you have to send it to Cisco for them to do it. However looking on Cisco's Web site I found the Password Recovery Procedure for PIX. The only one I have access to is in production so I can't "test" this out. Comments will be appreciated.
Thanks,
Joey Fowler
