Yes, the primary unit will failover, though it may take up to a minute.
There's a bug in many versions that causes the failover process to take much
longer (10 minutes) if you're using a syslog server. They fixed it by turning
off syslogging of the failover process!




Not  a problem, since I have the OS diskette. I didn't need to do the
recovery, I was seeking the general knowledge around it. Here is another
question though.
 
When you have 2 firewalls and they are setup for redundancy, ( forgive my
ignorance if I'm using the incorrect terms and feel free to correct me. )
and one fails, does the other automatically step in, or how does that work?
 
Joey

[Fowler, Robert]  ) -----Original Message-----
From: Guyler, Rik [EESUS] [mailto:[EMAIL PROTECTED]]
Sent: Monday, August 28, 2000 12:40 PM
To: Fowler, Joey; Cisco Groupstudy (E-mail)
Subject: RE: Pix Firewall Password Recovery


I have done the PIX password recovery per CCO and can confirm that it does
indeed work as stated.  The only "gotcha" I can think would be a problem is
knowing the correct PIX OS version running on the box.
 
Rik Guyler

-----Original Message-----
From: Fowler, Joey [mailto:[EMAIL PROTECTED]]
Sent: Monday, August 28, 2000 10:31 AM
To: [EMAIL PROTECTED]
Subject: Pix Firewall Password Recovery




I've been told be someone who attended the Cisco training course on PIX that
to do a password recovery on one you have to send it to Cisco for them to do
it. However looking on Cisco's Web site I found the Password Recovery
Procedure for PIX. The only one I have access to is in production so I can't
"test" this out. Comments will be appreciated.


Thanks, 
Joey Fowler 



Arthur Davis
Network Engineer
Altra Energy Technologies


____________________________________________________________________
Get free email and a permanent address at http://www.netaddress.com/?N=1

___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to