This is called 'routing on a stick'. Send us your sanitized config. What
router are you using?
>From: "sujar khmar" <[EMAIL PROTECTED]>
>Reply-To: "sujar khmar" <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: VLAN's
>Date: Tue, 29 Aug 2000 14:56:29 -0400
>
>Group,
> I have a catalyst 3524 switch in my practice lab set up with four
>vlans
>(1-4). One port is a member of all vlans and that is the router port. In
>what I have learned you should be able to be a node on vlan 2 and be able
>to
>go out the vlan2 port on the switch to the router and back to the vlan 4
>port (or any other vlan for that matter) and reach a node on vlan 4. I
>said should be able to because it doesn't work that way right now for me.
>I
>can see every node on the network except the nodes on vlan 1, 3-4. I have
>deduced that it isn't being routed back into the appropriate port. All
>these networks are on the same subnet, but since it's not a 5000 so I can't
>assign a different subnet.
> Am I way off base here? My question really is how can I route vlan 1
>back to vlan 2 via one ethernet port on the router back to the other vlans.
>
>
>___________________________________
>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>FAQ, list archives, and subscription info: http://www.groupstudy.com
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public profile at
http://profiles.msn.com.
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
