You need VLAN trunking between the switch and the router. It requires a
FastEthernet port. (Won't work on a 10Mbs Ethernet.)
http://www.cisco.com/warp/public/473/24.html
http://www.cisco.com/warp/public/473/#cat
> -----Original Message-----
> From: sujar khmar [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, August 29, 2000 1:56 PM
> To: [EMAIL PROTECTED]
> Subject: VLAN's
>
>
> Group,
> I have a catalyst 3524 switch in my practice lab set up
> with four vlans
> (1-4). One port is a member of all vlans and that is the
> router port. In
> what I have learned you should be able to be a node on vlan 2
> and be able to
> go out the vlan2 port on the switch to the router and back to
> the vlan 4
> port (or any other vlan for that matter) and reach a node on
> vlan 4. I
> said should be able to because it doesn't work that way right
> now for me. I
> can see every node on the network except the nodes on vlan 1,
> 3-4. I have
> deduced that it isn't being routed back into the appropriate
> port. All
> these networks are on the same subnet, but since it's not a
> 5000 so I can't
> assign a different subnet.
> Am I way off base here? My question really is how can I
> route vlan 1
> back to vlan 2 via one ethernet port on the router back to
> the other vlans.
>
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
