Your subject line contains tracert, but no info about tracert result in your
message.
What happens when you tracert 12.0.0.1 from 10.0.0.5?
In order for ping to work, both source and destination must be able to see
each other.
Check if your router routing on both networks (12.0.0.0 and 10.0.0.0)?
Router#show conf
router rip (or another rp)
network 10.0.0.0
network 12.0.0.0
Check if your router has any access lists enabled that prevents the outside
from seeing the inside.
Router#show ip access-list
Hth,
Ole
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Ole Drews Jensen
Systems Network Manager
CCNA, MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL PROTECTED]
http://www.insync.net/~drews/ccnp
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----Original Message-----
From: David Ristau [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, August 30, 2000 2:03 PM
To: [EMAIL PROTECTED]
Subject: Connectivity Issues with ping/tracert
a web site say 12.0.0.1 sits out on a public network,
a user across the nation, say in Oregon, on his workstation
host 10.0.0.5 cannot ping the server at 12.0.0.1
the user telnets into his Cisco router at 10.0.0.1 and
can ping the server at 12.0.0.1
the user goes out the the internet to several looking-glass
sites and can ping/tracert to the server.
There are no filters on the 10.0.0.1 router
it appears there are no filters in the path to the
12.0.0.1 router from the 10.0.0.1 router
any ideas why this happening or ways to figure it out...
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
