Yes... In fact in an ATM backbone enviroment it is very very common.
----- Original Message -----
From: "Patrick Kirk" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, August 28, 2000 3:47 PM
Subject: ILS + LANE trunks
> Edge switch w/out LANE capability (Cat4000). Can I connect it to a 5500
> (via ISL or dot1q trunking) that already has LANE trunking set up. This
> would allow the edge switch to participate in VTP and communicate w/ the
> rest of the network w/out having to be a LANE client.
>
> I'm not sure a switch can have 2 trunks. But can it have 2 trunks w/ 2
> different trunking protocols??? One ISL trunk w/ one LANE trunk??
>
> Anybody have this kind of setup? Done this in the lab? Seen literature
> that says it can work? I've looked all over Cisco's website and it shows
> all kinds of diagrams w/ this exact scenario, but never says in the
> documentation that a switch can have 2 functioning trunks???
>
> Thanks in advance.
>
>
> Patrick Kirk
> Network Engineer
> Vision Service Plan
> http://www.vsp.com
>
>
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
