The answer is B, when a particular queue is being processed, packets are
sent until
the number of bytes send exceeds the queue byte or until the queue is empty.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Doug Laing
Sent: 13 September 2000 15:01
To: [EMAIL PROTECTED]
Subject: Custom queue
Here is another study question for clarification. Assume the following
configuration:
queue-list 1 protocol ip 1
queue-list 1 protocol ipx 2
queue-list 1 protocol appletalk 3
queue-list 1 protocol ip 4 tcp 20
queue-list 1 default 5
queue-list 1 queue 1 byte-count 4500
A) Once the byte count in Queue 1 is reached while transmitting a
packet, the data is sent, then the router immediately goes to Queue 2.
B)Once the byte count in Queue 1 is reached while transmitting a packet,
the entire packet is sent, then the router immediately goes to Queue 2.
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
