The router will send the entire packet to finish off the byte count.
If it has serviced 4400 bytes from queue 1 it can still transmit 100 bytes
before moving to queue 2. If a 1500 bytes packet is next up in queue 1 it
will transmit the entire packet before going to queue 2.
This means that it will have actually transmitted 5900 bytes even though the
limit was set to 4500.
>
>Here is another study question for clarification. Assume the following
>configuration:
>
>queue-list 1 protocol ip 1
>queue-list 1 protocol ipx 2
>queue-list 1 protocol appletalk 3
>queue-list 1 protocol ip 4 tcp 20
>queue-list 1 default 5
>queue-list 1 queue 1 byte-count 4500
>
>A) Once the byte count in Queue 1 is reached while transmitting a
>packet, the data is sent, then the router immediately goes to Queue 2.
>
>B)Once the byte count in Queue 1 is reached while transmitting a packet,
>the entire packet is sent, then the router immediately goes to Queue 2.
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public profile at
http://profiles.msn.com.
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
