I'm having some difficulty getting bridge-group routing to happen. Static
routing happens just ducky between two IP addressed interfaces. IRB is
enabled. Bridge group 64 (my number of the month) remains painfully silent
as the packets bounce back and forth, back and forth, between a routed port
and the default gateway downstream. The (sparse) manual has been followed,
but the BVI class C virtual interface will neither route nor respond.
The example scripts at Cisco were quite instructive. They do not, however,
assign routed interfaces a direct IP address, instead relying on this BVI
scheme. The very one I can't get to work.
Anyone out there with similar equipment, having time, might drop a piece of
wisdom this way.
Best, G.
"Be strict in what you send, and forgiving in what you receive."
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
George Hartnell, Network Supervisor
Bellingham School District, 1306 DuPont St.
Bellingham, Wa. 98225-3198 (360)647-6860
[EMAIL PROTECTED] Internet Mail
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
