The configuration is automatically saved once you make a change... if you
want to make an offline copy, use tftp or rcp (code version 5.4.x and
greater)
copy config tftp
-or-
copy config rcp
once you enter the command, there will be a series of prompts... just
provide what is being requested...
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Rossetti, Stan
Sent: Monday, October 30, 2000 1:09 PM
To: '[EMAIL PROTECTED]'
Subject: How do I save the configuration on a 6506/9 Switch??
Does anybody know how to save the configuration on a 6506/9 switch. I have
never used one of these switch before and noticed that there is not a "copy
ru star" command. There is also not a running config that I am able to
find. The only configuration that I can find is the default and non-default
config.
Thanks,
Stan Rossetti
Russia Services Group
Email: [EMAIL PROTECTED]
Phone: (256) 544-5031
Beeper: 544-1183 pin # 0112
<<...>>
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
