Stan,
The 6509 can run the Catalyst OS or Catalyst IOS.
The IOS for Catalyst 6500 is relatively new and follows the standard IOS command
structure.
However most people still use the Catalyst OS as the IOS does not yet have all the
functionality of Catalyst OS or the field exposure. Any configuration change is made
immediately and is saved automatically. There is no concept of startup or running
configurations.
If the "clear config all" command is used then a show conf will display any non default
configuration. This will include the standard settings for line cards. The "sh conf
all"
will display all the default and non-default configuration.
Hope this helps.
"Rossetti, Stan" wrote:
> Does anybody know how to save the configuration on a 6506/9 switch. I have
> never used one of these switch before and noticed that there is not a "copy
> ru star" command. There is also not a running config that I am able to
> find. The only configuration that I can find is the default and non-default
> config.
>
> Thanks,
>
> Stan Rossetti
>
> Russia Services Group
> Email: [EMAIL PROTECTED]
> Phone: (256) 544-5031
> Beeper: 544-1183 pin # 0112
>
> <<...>>
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
