Hello Group,
I want to build a router lab that will allow me start the CCNP track. First
and foremost is obtaining some usable hands-on training. The equipment that
I have is as follows:
1 - 1900 switch
1 - 2900 10/100 switch
1 - 2500 router 2 serial / 1 bri
2 - 3600 router both have 1 2port ethernet module
- very limited associated cabling
- very limited funding
My question is simply...What can I build in this present situation that will
provide hands-on router understanding. I want to learn more about rip,
igrp, ospf, eigrp and bgp. Any thoughts or comments will be greatly
appreciated.
Regards,
Robert
Robert M. Lopez
Network Planning
Ann Arbor Data Center
Pfizer Global Research & Development
Phone 734-622-3948 Fax 734-622-1690
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
