Well
it is hard
loopback0 -3600 - 2900/1900 3600(ethernet) loopback0
since your 3600 don;t have the serial port, we can use your 2500 router
also the isdn, if you know someone using isdn somewhere, you can ask he/she
to set up
something like ddr for you
Sam Li
----- Original Message -----
From: Lopez, Robert <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, October 31, 2000 4:07 AM
Subject: router training lab
> Hello Group,
>
> I want to build a router lab that will allow me start the CCNP track.
First
> and foremost is obtaining some usable hands-on training. The equipment
that
> I have is as follows:
>
> 1 - 1900 switch
> 1 - 2900 10/100 switch
> 1 - 2500 router 2 serial / 1 bri
> 2 - 3600 router both have 1 2port ethernet module
> - very limited associated cabling
> - very limited funding
>
> My question is simply...What can I build in this present situation that
will
> provide hands-on router understanding. I want to learn more about rip,
> igrp, ospf, eigrp and bgp. Any thoughts or comments will be greatly
> appreciated.
>
> Regards,
>
> Robert
>
>
>
>
>
> Robert M. Lopez
> Network Planning
> Ann Arbor Data Center
> Pfizer Global Research & Development
> Phone 734-622-3948 Fax 734-622-1690
>
>
>
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
