Well,
i think you should try the command "ip ospf network point-to-point" under
the loopback.
bye.
-----Message d'origine-----
De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]De la part de
Elaluf, Sylvia,
Envoy� : lundi 4 d�cembre 2000 15:11
� : [EMAIL PROTECTED]
Objet : OSPF question
Hello everybody
I need some help with the following:
Given the following
loopback 0
ip address 10.10.10.1 255.255.255.0
router ospf 1
network 10.0.0.0 0.0.0.255 area 0
sh ip route 10.10.10.1
known via connected loopback 0
distributed via ospf 1
10.10.10.1 255.255.255.255
what I want is to Advertise the loopback interface as class C and not host
specific route.
distributed via ospf 1
10.10.10.1 255.255.255.0
How do I do that?
Silvia Elaluf-Calderwood
[EMAIL PROTECTED]
"Only two things are infinite, the universe and human stupidity, and I'm not
sure about the former."
- Albert Einstein
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
