check whether the command "no auto-summary" has been configured or not configured, i.e. default summary behavior?? Kevin ----- Original Message ----- From: "Jason Baker" <[EMAIL PROTECTED]> To: "'Kevin Wigle'" <[EMAIL PROTECTED]>; "cisco" <[EMAIL PROTECTED]> Sent: Tuesday, 12 December, 2000 18:38 Subject: RE: EIGRP > another thing to check however is ensure the no auto summary command :). > > Regards, > > Jason Baker > Network Engineer > MCSE, CCNA > > > -----Original Message----- > From: Jason Baker [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, December 13, 2000 9:23 AM > To: 'Kevin Wigle'; cisco > Subject: RE: EIGRP > > > Hi Kevin, > > i have found this happens on version 11 of the IOS. However that will > work on version 12 :). > > Regards, > > Jason Baker > Network Engineer > MCSE, CCNA > > -----Original Message----- > From: Kevin Wigle [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, December 13, 2000 7:36 AM > To: cisco > Subject: EIGRP > > > Group, > > In the lab again looking at a scenario. > > At first, I configured a transit link with a /24 mask. > > Later I thought - gee that's going to be a /29 or /30 in real life so I went > to change it. > > However, the router wouldn't accept "network 200.1.1.0 0.0.0.7" under > "router eigrp 10". It fails with the caret pointing at the first zero in > the wildcard mask. > > doing a "?" after "network 200.1.1.0" just comes up with a <cr>. > > However, on CCO I see examples of both statements - some with the mask > others without. > > Has the behavior of EIGRP changed lately even so that CCO has conflicting > examples or am I missing some connection? > > All routers have ip classless and ip subnet-zero configured. > > By the way, my lab scenario has OSPF redistributing the EIGRP. Looking at an > upstream routing table it shows the EIGRP network as a /29 even though there > is no "mask" in the statement. > > So what am I missing? > > Kevin Wigle > > > _________________________________ > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > _________________________________ > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
