EIGRP was also quite broken in IOS 11.0. If you're running EIGRP, you 
should upgrade.

Priscilla

At 11:53 AM 12/13/00, Tony van Ree wrote:
>Hi Jason,
>
>I think you will find that version 11 of the IOS has "no ip classless" set 
>by default and version 12 has "ip classess" as its default.
>
>Earlier I sent out a message re checking the "ip classless" 
>statement.  That was my thinking as well.
>
>Teunis,
>Hobart, Tasmania
>Australia
>
>
>
>On Wednesday, December 13, 2000 at 09:23:21 AM, Jason Baker wrote:
>
> > Hi Kevin,
> >
> > i have found this happens on version 11 of the IOS. However that will
> > work on version 12 :).
> >
> > Regards,
> >
> > Jason Baker
> > Network Engineer
> > MCSE, CCNA
> >
> > -----Original Message-----
> > From: Kevin Wigle [mailto:[EMAIL PROTECTED]]
> > Sent: Wednesday, December 13, 2000 7:36 AM
> > To: cisco
> > Subject: EIGRP
> >
> >
> > Group,
> >
> > In the lab again looking at a scenario.
> >
> > At first, I configured a transit link with a /24 mask.
> >
> > Later I thought - gee that's going to be a /29 or /30 in real life so I 
> went
> > to change it.
> >
> > However, the router wouldn't accept "network 200.1.1.0 0.0.0.7" under
> > "router eigrp 10".  It fails with the caret pointing at the first zero in
> > the wildcard mask.
> >
> > doing a "?" after "network 200.1.1.0" just comes up with a <cr>.
> >
> > However, on CCO I see examples of both statements - some with the mask
> > others without.
> >
> > Has the behavior of EIGRP changed lately even so that CCO has conflicting
> > examples or am I missing some connection?
> >
> > All routers have ip classless and ip subnet-zero configured.
> >
> > By the way, my lab scenario has OSPF redistributing the EIGRP. Looking 
> at an
> > upstream routing table it shows the EIGRP network as a /29 even though 
> there
> > is no "mask" in the statement.
> >
> > So what am I missing?
> >
> > Kevin Wigle
> >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
> > _________________________________
> > FAQ, list archives, and subscription info: 
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
> >
>
>
>--
>www.tasmail.com
>
>
>_________________________________
>FAQ, list archives, and subscription info: 
>http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]


________________________

Priscilla Oppenheimer
http://www.priscilla.com

_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to