do you have ip classless enabled?
Andy
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Tim Ross
Sent: Monday, December 18, 2000 15:14
To: [EMAIL PROTECTED]; GroupStudy LAB
Subject: All-in-one CCIE Lab Study Guide: Lab #4
I have started going through the labs in the All-in-one Study Guide and =
have a problem with Lab #4. The lab is for an ISDN floating static =
route. I am using 2 3104's and an AGS+ as a frame_switch. The ISDN port =
can ping the other ISDN port. Both are on the same subnet, 196.1.1.1 and =
196.1.1.2. The ISDN line (using a Teltone simulator) dials fine, but the =
Static route does not appear in the routing table. I am using IOS =
version 11.2 Enterprise on both ISDN routers(3104's, upgraded to run IOS =
11.2 Enterprise). I have entered the route several times and double =
checked by entries: IP ROUTE 0.0.0.0 0.0.0.0 196.1.1.2 121 , but the =
route will not appear in my routing table. Anyone ran across this =
problem? I will probably see what I am overlooking soon, but insight is =
appreciated.
Thanks,
Tim
_______________________________________________________
To unsubscribe from the CCIELAB list, send a message to
[EMAIL PROTECTED] with the body containing:
unsubscribe ccielab
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
