Where do i get this "all in one ccie study guide"
Babar Hameed
-----Original Message-----
From: Andrew Lennon <[EMAIL PROTECTED]>
To: Tim Ross <[EMAIL PROTECTED]>, [EMAIL PROTECTED]
Date: Mon, 18 Dec 2000 15:28:59 -0000
Subject: RE: All-in-one CCIE Lab Study Guide: Lab #4
> do you have ip classless enabled?
>
> Andy
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Tim Ross
> Sent: Monday, December 18, 2000 15:14
> To: [EMAIL PROTECTED]; GroupStudy LAB
> Subject: All-in-one CCIE Lab Study Guide: Lab #4
>
>
> I have started going through the labs in the All-in-one Study Guide and
> =
> have a problem with Lab #4. The lab is for an ISDN floating static =
> route. I am using 2 3104's and an AGS+ as a frame_switch. The ISDN port
> =
> can ping the other ISDN port. Both are on the same subnet, 196.1.1.1
> and =
> 196.1.1.2. The ISDN line (using a Teltone simulator) dials fine, but
> the =
> Static route does not appear in the routing table. I am using IOS =
> version 11.2 Enterprise on both ISDN routers(3104's, upgraded to run
> IOS =
> 11.2 Enterprise). I have entered the route several times and double =
> checked by entries: IP ROUTE 0.0.0.0 0.0.0.0 196.1.1.2 121 , but the =
> route will not appear in my routing table. Anyone ran across this =
> problem? I will probably see what I am overlooking soon, but insight is
> =
> appreciated.
>
> Thanks,
> Tim
>
> _______________________________________________________
> To unsubscribe from the CCIELAB list, send a message to
> [EMAIL PROTECTED] with the body containing:
> unsubscribe ccielab
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
