I searched on CCO and can find no record of "no service password-recovery";
I don't believe there is such an animal. You're not using an older version
of HyperTerminal, are you? The old version didn't send the break signal
properly. You can try the newer version or a different terminal emulator
altogether if this is the case.
- Don
-----Original Message-----
From: Eric Fisher [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, December 19, 2000 12:54 PM
To: [EMAIL PROTECTED]
Subject: Pwd Question
I have this router that someone must have entered no service
password-recovery and I don't have the password. You are unable to get into
Rommon to change the confreg. Is there a work around this or do I have to
call Cisco.
Thanks
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
