What ver IOS are you trying this on? It worked with 12.0.5 on 2600's!

""Donald B Johnson Jr"" <[EMAIL PROTECTED]> wrote in message
029101c0702d$c3557210$[EMAIL PROTECTED]">news:029101c0702d$c3557210$[EMAIL PROTECTED]...
> routerb(config)#
> routerb(config)#service password-recovery
>                                                            ^
> % Invalid input detected at '^' marker.
>
> routerb(config)# no service password-recovery
>                                                                  ^
> % Invalid input detected at '^' marker.
>
> routerb(config)#
>
> routerb(config)#
> Duck
> ----- Original Message -----
> From: Eric Fisher <[EMAIL PROTECTED]>
> To: Taylor, Don <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
> Sent: Tuesday, December 19, 2000 1:25 PM
> Subject: Re: Pwd Question
>
>
> > RE: Pwd QuestionDon,
> >
> > It is an undocumented command.
> >
> >
> >
> >   ----- Original Message -----=20
> >   From: Taylor, Don=20
> >   To: 'Eric Fisher' ; [EMAIL PROTECTED]=20
> >   Sent: Tuesday, December 19, 2000 4:13 PM
> >   Subject: RE: Pwd Question
> >
> >
> >   I searched on CCO and can find no record of "no service =
> > password-recovery"; I don't believe there is such an animal. You're not
=
> > using an older version of HyperTerminal, are you? The old version didn't
=
> > send the break signal properly. You can try the newer version or a =
> > different terminal emulator altogether if this is the case.
> >
> >   - Don=20
> >
> >   -----Original Message-----=20
> >   From: Eric Fisher [mailto:[EMAIL PROTECTED]]=20
> >   Sent: Tuesday, December 19, 2000 12:54 PM=20
> >   To: [EMAIL PROTECTED]=20
> >   Subject: Pwd Question=20
> >
> >
> >
> >   I have this router that someone must have entered no service=20
> >   password-recovery and I don't have the password.  You are unable to =
> > get into=20
> >   Rommon to change the confreg.  Is there a work around this or do I =
> > have to=20
> >   call Cisco.=20
> >
> >   Thanks=20
> >
> >
> >
> >   _________________________________=20
> >   FAQ, list archives, and subscription info: =
> > http://www.groupstudy.com/list/cisco.html=20
> >   Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
=
> >
> >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>


_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to