You need to separate the default route from the mask. You should have a
total of six (6) periods or dots. You have seven (7) use this instead:
ip route 0.0.0.0 0.0.0.0 172.16.11.1
..dj
<[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> 2621(config)#ip route 0.0.0.0.0.0.0.0 172.16.11.1
> % Incomplete command.<-----------------Got this?????
> 2621(config)#
> 2621#config t
> Enter configuration commands, one per line. End with CNTL/Z.
> 2621(config)#ip route 0.0.0.0.0.0.0.0 172.16.11.1<-----------I typed this
> EXACTLY as it said to do.
> % Incomplete command.<-----------------Got this?????
> 2621(config)#ip route 0.0.0.0.0.0.0.0 172.16.11.1
> % Incomplete command.
> 2621(config)#ip classless
> 2621(config)#show ip route
> ^
>
> % Invalid input detected at '^' marker.
>
>
> --------------------------------
> While doing Lab 5.3a Default Routes, page 40, on routerSim 2.X, I get the
> above error msg while trying to create a default route for the 2621
router:
>
> Does anyone know what, if anything I am doing wrong or if there is a
mistake
> in the text?
>
> TIA,
>
> Jess
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
